Kirloskar SRF Series is monobloc pump for firefighting application. It is a 2 Pole monobloc pump, at rated voltage, 50 Hz, Three Phase A.C. power Supply.

Kirloskar’s Romak process pumps are used for handling various types of CLEAR & CLEAN chemical liquids with leak-free transportation. These pumps are manufactured to close tolerance and are of rigid construction. Romak (RMK) pump is a magnetic drive pump.

Kirloskar Air Cooled Thermic Fluid AT series of process pumps come with a back pull out design, which enables to remove the rotating unit of pump for inspection and repairs without disturbing suction and delivery pipe connections.

Kirloskar KPD/KPDQF/KPDJ process pumps are used for handling various types of chemical liquids. These process pumps are manufactured to close tolerance and are of rigid construction. However, proper installation, operation and maintenance are equally important to ensure trouble free service. KPD/KPDQF/KPDJ process pumps are either gland packed or mechanically sealed. KPD pumps come with an enclosed impeller (with casing cover for heating/cooling arrangement.). KPD-QF pumps are equipped with a semi-open impeller while the KPD-J type pumps come with a jacketed delivery, casing and casing cover.

Kirloskar SHM solid handling pumps are single stage, single suction pumps with a back pull out type design. These are horizontal non-clog pumps while SHS are vertical non-clog pumps used for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These solid handling pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. SHM solid handling pumps have standard grease lubrication, although oil lubrication is also available as an option. In case of SHS pumps, the lubrication is grease based. The complete range of SHM solid handling pumps is covered by four driving units, thereby reducing inventory and achieving interchangeability of parts.

Kirloskar UP series are horizontal split casing type pumps with suction, discharge nozzles and their supporting feet integrally cast in the lower half casing. This construction enables to remove the rotating unit for inspection and repairs by just removing upper half casing and without disturbing alignment, pipe connection or prime mover.

SCT extended pumps are horizontally axially split casing, single stage pumps. SCT extended pumps are either double suction or single suction pumps with horizontal shaft and detachable stuffing box. The impeller is accurately balanced by a double or single suction.

Kirloskar DB large pumps equip a back-pull-out design which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of DB large pump is covered by three driving units thereby reducing inventory and achieving interchangeability of parts. These DBL water pumps are either gland packed or mechanically sealed with robust cast iron casing and are highly efficient. Bronze impeller makes DBL water pumps easy to maintain, reliable and long lasting.

Kirloskar CPHM pumps carry a back-pull-out design which enables removing the rotating unit of pump for inspection and repairs without disturbing the pipe connections. The complete range of CPHM water pump is covered by eight driving units thereby reducing inventory and achieving interchangeability of parts. These CPHM water pumps are either gland packed or mechanically sealed.

Kirloskar MF pumps are single stage, horizontal spindle volute type foot-mounted end suction pumps fitted with oil lubricated ball bearings and thrust bearing. These are low head and high capacity water pumps available with either horizontal or vertical delivery options. MF water pumps are provided with semi-open type mixed flow impeller. MF-E and MF-X pumps are provided with enclosed type mixed flow impeller.

GK pumps conform to ISO: 5199 & dimensionally are fully conforming to ISO 2858/EN: 22858. These pumps equip a horizontal back pullout design and radially split, single stage, centrifugal end suction volute with top centerline delivery. Pump feet are integrally cast with delivery casing. Impeller is of an enclosed type. Bearing housing is fitted with a support foot. Pump shaft is supported by grease lubricated anti-friction deep groove ball bearings as a standard scope of supply. GK pumps are mainly used for clean and clear liquids, which are free from suspended solids\\particles.

Kirloskar KPDS sump pump is used for process applications. It has a wide range of applications in various chemical process industries. KPD-S type sump pumps are manufactured to close tolerances and as per rigid specifications.

Kirloskar SHS solid handling pumps are vertical non-clog pumps for wet pit applications. The pumps unit is suspended by a column pipe which also protects the transmission shaft. SHS Solid handling pumps are available with column length up to 6.5 metres. SHS solid handling pumps are manufactured to close tolerances and as per rigid specifications.

Kirloskar DSM/DSMT split case pumps are horizontally mounted and axially split casing type, two stage pumps. Split case construction enables to remove the rotating unit of the pump without disturbing pipe connections and alignment.

Kirloskar NS submersible pump is used for sewage and seepage application. NS submersible pumps are single stage, single suction pumps. NS submersible pump impellers are of non-clog type which allow smooth passage of solids and cater to wide range of applications. NS pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with a rubber diaphragm to make it leak proof joint.

Kirloskar multistage side channel CF pumps are capable of handling aerated liquids. CF pumps have been developed especially for heavy duty applications in all industrial areas. The pump is capable of handling clean, slightly contaminated or aggressive liquids without any problem under the most difficult operating conditions. The multi-stage side channel CF pump is very reliable and easy to maintain. CF pumps are of great importance in areas where high security and prompt service is indispensable.

Kirloskar RKB series is a horizontal multistage centrifugal pump. RKB/RKBF/RKBK horizontal multistage centrifugal pumps are side suction pumps with vertical delivery and diffuser type casing. RKB horizontal multistage centrifugal pump series impellers are of radial flow type provided with balancing holes. RKB/RKBF/RKBK horizontal multistage centrifugal pumps have standard grease lubrication, suitable for coupling with electric motors.