

Branch Office Call Us

+91 95666 73535



Whatsapp

+91 88700 10633



Mail Us

info@saiengg.in

Welcome
About Us
Our Products
Brands
Blog
Certificate

Welcome
About Us
Our Products
Brands
Blog
Certificate

Hello world!

by saienggdev | Feb 22, 2024 | Uncategorized

Welcome to WordPress. This is your first post. Edit or delete it, then start writing!

Heading gif -1

Hydro Stream Thru-Bore LLC Series - Horizontal Split Case Pump – HL

HL pumps are horizontally axially split casing, single-stage or two-stage pumps. HL pumps are either double suction or single suction pumps with a horizontal shaft and detachable stuffing box. The impeller is accurately balanced by a double or single suction.

APPLICATIONS

Water supply

Irrigation

Power plants

SPECIFICATIONS

Delivery size up to 400 mm

Capacity up to 1800 m3/hr

Head up to 120 metres

FEATURES

High hydraulic and overall efficiency

Good suction performance

Low NPSH requirement

Low maintenance

Primary Usage

Irrigation

Power Plant

Water Supply

Hydro Stream Thru-Bore LLC Series - Horizontal Split Case Pump – HL Catalogue

Hydro Stream Thru-Bore LLC Series IOM Manual - Horizontal Split Case Pump – HL Catalogue

Heading gif -1

Split Case Pump - UP/UPL/UPH/UP(T)

Kirloskar UP series are horizontal split casing type pumps with suction, discharge nozzles and their supporting feet integrally cast in the lower half casing. This construction enables to remove the rotating unit for inspection and repairs by just removing upper half casing and without disturbing alignment, pipe connection or prime mover.

APPLICATIONS

Air-conditioning

Firefighting

Irrigation

Paper, sugar and textile mills

Power plants

Water supply

SPECIFICATIONS

Delivery size up to 1220 mm

Capacity up to 40,000 m3/hr

Head up to 220 metres

FEATURES

Gland packed/mechanical seal

50HZ/60HZ availability

Good suction performance and low NPSH

Vibration-free performance

Primary Usage

Chemical & Pharma

Coal

Sugar Factory

Food Beverages

Gas Refinery

Irrigation

Marine & defence

Oil Refinery

Power Plant

Textile

Tyre

Water Resource

UP-UPL-UPH-UP(T) Catalogue

IOM Extented Catalogue

Heading gif -1

Split Case Pump - SCT - Extended

SCT extended pumps are horizontally axially split casing, single stage pumps. SCT extended pumps are either double suction or single suction pumps with horizontal shaft and detachable stuffing box. The impeller is accurately balanced by a double or single suction.

APPLICATIONS

Air conditioning and refrigeration system

Fire protection systems and mining

Petroleum refineries

Water/liquids with slight impurities

SPECIFICATIONS

Delivery size up to 350 mm

Capacity up to 4000 m3/hr

Head up to 240 metres

Temperature (-) 10° C to 100° C

FEATURES

Pump axis horizontal or vertical

Gland packed/mechanical seal

50HZ/60HZ availability

Primary Usage

Gas Refinery

Power Plant

Water Resource

Oil Refinery

SCT Extended Catalogue

SCT Extended IOM Catalogue

Heading gif -1

Split Case Pump - SCT

SCT pumps are horizontally axially split casing, single stage pumps. SCT pumps are either double suction or single suction pumps with a horizontal shaft and detachable stuffing box. The impeller is accurately balanced by a double or single suction.

APPLICATIONS

Air-conditioning and refrigeration system

Fire protection systems and mining

Petroleum refineries

Water/liquids with slight impurities

SPECIFICATIONS

Delivery size up to 250 mm

Capacity up to 1100 m3/hr

Head up to 115 metres

FEATURES

Pump axis horizontal or vertical

Gland packed/mechanical seal

50HZ/60HZ availability

Primary Usage

Chemical & pharma

Coal

Food & Beverage

Gas Refinery

Irrigation

Marine & Defence

Oil Refinery

Textile

Textiles

Water Resource

SCT IOM Catalogue

Heading gif -1

Split Case Pump - DSM/DSMT

Kirloskar DSM/DSMT split case pumps are horizontally mounted and axially split casing type, two stage pumps. Split case construction enables to remove the rotating unit of the pump without disturbing pipe connections and alignment.

APPLICATIONS

Air-conditioning

Primary and Secondary (HVAC)

Heating Ventilation

Firefighting

Irrigation

Mine drainage

Power plants

Water supply

SPECIFICATIONS

Delivery size from 50 mm to 150 mm

Capacity up to 470 m3/hr

Head up to 180 metres

Temperature from 8° C to 90° C

FEATURES

Gland packed/mechanical seal

50HZ/60HZ availability

Good suction performance and low NPSH

Vibration free performance

Primary Usage

Chemical & Pharma

Coal

Gas refinery

Marine & Defence

Oil Refinery

Power Plant

Water Resource

DSM-DSMT Catalogue

DSM-DSMT IOM Catalogue

Heading gif -1

Air Cooled Thermic Fluid Process Pump - AT

Kirloskar Air Cooled Thermic Fluid AT series of process pumps come with a back pull out design, which enables to remove the rotating unit of pump for inspection and repairs without disturbing suction and delivery pipe connections.

APPLICATIONS

Thermic fluid

Synthetic oil

Hot oil

SPECIFICATIONS

Delivery size from 32 mm to 80 mm

Capacity up to 250 m3/hr

Head up to 100 metres

Working pressure up to 16 bar

Temperature up to 350° C

FEATURES

The pump is integral foot mounted for given temperature range

More reliable for thermal isolation of volute casing

Balanced or unbalanced maintenance free standard mechanical seal

No additional cooling required (air cooled)

Pump with grafoil packing at stuffing box cavity

The design is as per standard - EN 22858

Primary Usage

Chemical & pharma

Food Beverages

Textile

End Suction Process Pump AT Catalogue

IOM AT Pump Catalogue

Heading gif -1

Magnetic Drive Process Pump - ROMAK

Kirloskar’s Romak process pumps are used for handling various types of CLEAR & CLEAN chemical liquids with leak-free transportation. These pumps are manufactured to close tolerance and are of rigid construction. Romak (RMK) pump is a magnetic drive pump.

APPLICATIONS

Chemicals - paints, solvents, intermediaries, resin, polymers and other acidic and basic chemicals

Pharmaceuticals

Petrochemicals

Suitable for various process industries for clean/clear liquids without any suspended particles

SPECIFICATIONS

Delivery size up to 100 mm

Capacity up to 300 m3/hr

Head up to 150 metres

Speed 2900, 1450, 980 rpm at 50 Hz and 3500, 1750, 1150 rpm at 60 Hz.

Temperature from (-)50° to 180° C

FEATURES

Seal-less and glandless pump

Magnetic drive pump comprises permanent magnet

Zero leakage

Designed as per ISO 2858/DIN EN 22858/ISO 5199 standards

MATERIAL OF CONSTRUCTION (MOC)

Pump casting, casing cover, wear ring and impeller shaft made of stainless steel and tested as per ASTM A351 M – CF8M

Pump shaft made of stainless steel and tested as per ASTM A276, Type 316 and 316L

Other (MOC) options available such as ASTM A890/890M CD4MCuN-1B Duplex, Alloy ASTM B473 UNS8020, ASTM A494 – Hastelloy B

Primary Usage

Chemical & pharma

End Suction Magnetic Process Pump Romak Catalogue

IOM ROMAK Catalogue

Heading gif -1

End Suction Process Pump - GK(P)

Kirloskar GK(P) pumps are used for handling various types of chemical liquids. These pumps are manufactured to close tolerance and are of rigid construction. GK(P) pumps are mainly used in process industries. The complete range of GK(P) process pumps is covered by four driving units, thereby reducing inventory and achieving interchangeability.

APPLICATIONS

Acids/alkalis

Hydrocarbons, oils

Various process chemicals

Food processing units

SPECIFICATIONS

Delivery size up to 150 mm

Capacity up to 500 m3/hr

Head up to 150 metres

Working pressure 16 - 25 bar

Temperature up to 180° C

FEATURES

End-suction centrifugal process pump

Back pull out design

Top centerline discharge with foot mounted as well as centerline volute casing

Availability of cooling jackets to cool stuffing box for liquids having temperature more than 105° C

ISO 2858/DIN EN 22858/ISO 5199

Primary Usage

Chemical & pharma

End Suction Process Pump GK(P) Catalogue

IOM GK(P) Catalogue

Heading gif -1

Canned Motor Process Pump - i-CM

Kirloskar i-CM process pumps are mainly used for chemical and process handling applications, which are free from suspended solids particles. i-CM process pumps are ideal for pumping corrosive and noxious fluids.

APPLICATIONS

Aggressive/toxic/explosive/hazardous/flammable chemicals (sulphuric acid, nitric acid, hydrofluoric acid, hydrocyanic acid, ethanoic acid, formic acid, etc.)

SPECIFICATIONS

Delivery size ranging from 32 to 50 mm

Capacity ranging from 4 to 80 m3/hr

Head up to 60 metres

Working pressure 16 bar

Temperature up to 90° C

FEATURES

i-CM pump is a seal less, glandless and emission-free Canned Motor pump

Seal less and glandless pump

Integrated motor design makes it compact in construction and light in weight

Primary Usage

Chemical & pharma

End Suction Process Pump i-CM Catalogue

IOM i-CM Catalogue

Heading gif -1

End Suction Process Pump - i-CP

Kirloskar End Section Process Pump i-CP pumps are horizontal, radially split, single stage, centrifugal end-suction volute with top centerline delivery. The impeller is of an enclosed type. The bearing housing is fitted with a support foot. The pump shaft is supported by pre-lubricated anti-friction sealed bearings as a standard scope of supply. i-CP pumps come without mechanical seal & without gland packing arrangement and yet ensure zero leakage from the stuffing box. This feature is achieved by the innovative design of the shaft sleeve, expeller and fluid arrester.

APPLICATIONS

Light chemicals like caustic soda, weak acids, etc.

Food & beverage industries – (sugar, vegetable oils, etc.)

Other applications like hot water, brine, DM water, lime water, etc.

SPECIFICATIONS

A. At 1450 rpm

Rate of flow up to 180 m3/hr

Head up to 55 m

B. At 2900 rpm

Rate of flow up to 180 m3/hr

Head up to 55 m

Temperature – up to 95 °C

FEATURES

Environment-friendly zero leakage pump.

Highly energy efficient

Maintenance free

No periodic bearing lubrication required

Sealing/flushing water not required

Self-venting design

Pump with back pull out design

Conforming to ISO 2858 standard

Compact design

Sturdy yet light in weight

Shaft is fully protected from liquid

Wide interchangeability of components

Primary Usage

Chemical & pharma

Power Plant

Water Resource

IOM i-CM Catalogue

Heading gif -1

End Suction Process Pump - KPD

Kirloskar End Section Process Pump KPD/KPDQF/KPDJ process pumps are used for handling various types of chemical liquids. These process pumps are manufactured to close tolerance and are of rigid construction. However, proper installation, operation and maintenance are equally important to ensure trouble free service. KPD/KPDQF/KPDJ process pumps are either gland packed or mechanically sealed. KPD pumps come with an enclosed impeller (with casing cover for heating/cooling arrangement.). KPD-QF pumps are equipped with a semi-open impeller while the KPD-J type pumps come with a jacketed delivery, casing and casing cover.

APPLICATIONS

Process industries

Petro-chemical industry

Nuclear industry

Refineries, fertiliser, paper, sugar and other industries

Air-conditioning

Distilleries

Water treatment plants

SPECIFICATIONS

Delivery size up to 350 mm

Capacity up to 1550 m3/hr

Head up to 225 metres

Working pressure 16 - 25 bar

Temperature (-) 50° C – 350° C

FEATURES

Horizontal and single stage

Top center line delivery

Oil lubricated bearings

API flushing plan

Primary Usage

Chemical & pharma

Power Plant

Food & Beverages

Marine & Defence

Oil Refinery

Textile

Tyre

Water Resource

End Suction Process Pump - KPD Catalogue

KPDS IOM Catalogue

IOM KPD KPDQF KPDJ Catalogue

Heading gif -1

End Suction Pump - DBxe

The DBxe pump series sets a new standard for energy-efficient water pumps by conforming to EN733/DIN24255 and featuring an innovative back-pull-out design, which allows for easy maintenance without disturbing pipe connections or the motor. Available in both gland-packed and mechanically sealed configurations, these pumps offer versatility for a range of applications.

This series is distinguished by its standardised and modular design, ensuring easy adaptability and scalability across different applications. Its optimised hydraulic design, particularly the casing and impeller, results in significantly lower energy consumption compared to its competitors. Additionally, the design minimises flow distortion, enhancing suction capabilities for providing optimal Net Positive Suction Head (NPSH).

The pumps are engineered for longevity, featuring maintenance-free sealed bearings that contribute to longer service life. Users can also choose between single and double mechanical seals in cartridge construction, further enhancing the flexibility and reliability of these pumps.
A key highlight of the DBxe series is its compliance with the Minimum Efficiency Index (MEI) requirement of ≥ 0.7 as per EN 16480, which signifies exceptional hydraulic performance and efficiency. With the minimum MEI threshold being 0.4, an MEI of 0.7 or higher is indicative of significantly reduced energy wastage, lower electricity costs and more sustainable operation.

Additionally, the DBxe pumps have earned the GreenPro Ecolabel certification, a Type-1 Ecolabel accredited by the Global Ecolabelling Network (GEN), underscoring their adherence to global sustainability standards. This certification reflects the pump ‘s low carbon footprint and its contribution to reducing environmental impact.

APPLICATIONS

Water supply

Sprinkler

Air conditioning

Industrial water

Swimming pool water

Hot water (Up to 90 C)

Fire fighting

Drinking water/Potable water

Cooling water

Condensate

Clean juice in sugar industry

Solvent in pharma industry

Alcohol in distillery

SPECIFICATIONS

Delivery size: 32 to 150 mm

Capacity: Up to 550 m3/hr

Head: Up to 100 meters

Speed from 1450 & 2900 rpm, 1760 & 3500 rpm

Working Pressure: 16 kg/cm2 (MAWP)

Temperature from -10° C to 90° C

Sealing: Gland Packed (Standard), Mechanical Seal (Against Order)

Lubrication: Grease (Standard) & Oil (Against Order)

Available in SS

FEATURES

The casing has axial suction and top centre line delivery with self venting design

The impellers are statically and dynamically balanced

Shaft is fully protected from the liquid being handled

The stuffing box is sealed by either gland packing or by mechanical seal (DIN/Cartridge)

Pre-lubricated grease sealed bearings are used as a standard scope of supply

Clockwise when viewed from driving end

Pumps can be driven by electric motor or engine

MATERIAL

Pump Casing / Casing Cover: Cast Iron

Impeller: Cast Iron / Bronze / CF8M/ CF8

Wear Rings: Cast Iron / Bronze

Pump Shaft: CS 45C8 / St. Steel ASTMA-276 TYPE 410

Shaft Sleeve: Stainless Steel - ASTM A 276 Type 410 H

Primary Usage

Coal

Food & Beverages

Gas Refinery

Irrigation

Oil Refinery

Power Plant

Textile

Water Resource

End Suction Pump - DBxe Catalogue

IOM DBxe Catalogue

Heading gif -1

End Suction Pump - GK

End section GK pumps conform to ISO: 5199 & dimensionally are fully conforming to ISO 2858/EN: 22858. These pumps equip a horizontal back pullout design and radially split, single stage, centrifugal end suction volute with top centerline delivery. Pump feet are integrally cast with delivery casing. Impeller is of an enclosed type. Bearing housing is fitted with a support foot. Pump shaft is supported by grease lubricated anti-friction deep groove ball bearings as a standard scope of supply. GK pumps are mainly used for clean and clear liquids, which are free from suspended solids particles.

APPLICATIONS

Water supply, hot water, drinking water

Sprinkling and irrigation

Air conditioning

Industrial water

Swimming pool water

Firefighting

Cooling water

Condensate

Clear juice

SPECIFICATIONS

Delivery size from 65 to 125 mm

Capacity from 20 to 450 m3/hr

Head up to 60 metres

Working pressure up to 16 bar

Temperature up to 90° C

FEATURES

Highly energy efficient

Pump with mechanical seal & gland packing arrangement

Sealing/flushing water not required

Self-venting design

Pump with back pull out design

Compact design & wide interchangeability of components

Shaft is fully protected from liquid

Primary Usage

Gas Refinery

Oil Refinery

Tyre

GK IOM Catalogue

Heading gif -1

End Suction Pump - CPHM

Kirloskar CPHM pumps carry a back-pull-out design which enables removing the rotating unit of pump for inspection and repairs without disturbing the pipe connections. The complete range of CPHM water pump is covered by eight driving units thereby reducing inventory and achieving interchangeability of parts. These CPHM water pumps are either gland packed or mechanically sealed.

APPLICATIONS

Air-conditioning

Firefighting

Booster services

Sprinkler system

Irrigation

SPECIFICATIONS

Delivery size from 20 mm to 200 mm (3/4 to 8)

Capacity up to 750 m3/hr (3300 US gpm)

Head up to 150 metres (480 ft.)

Temperature (-) 30° C to 90° C

FEATURES

Conforming to DIN 24256/ISO 2858

Back pull-out design

Gland packed/mechanical seal

50HZ/60HZ availability

Primary Usage

Chemical & pharma

Coal

Gas Refinery

Marine & Defence

Oil Refinery

Textile

Power Plant

End Suction Utility Pump CPHM Catalogue

CPHM IOM Catalogue

Heading gif -1

Mixed Flow Pump - MF

Kirloskar MF pumps are single stage, horizontal spindle volute type foot-mounted end suction pumps fitted with oil lubricated ball bearings and thrust bearing. These are low head and high capacity water pumps available with either horizontal or vertical delivery options. MF water pumps are provided with semi-open type mixed flow impeller. MF-E and MF-X pumps are provided with enclosed type mixed flow impeller.

APPLICATIONS

Air-conditioning

Drainage

Irrigation

Storm water

SPECIFICATIONS

Delivery size from 200 mm to 650 mm (8 to 26)

Capacity up to 7000 m3/hr (30,820 US gpm)

Head up to 30 metres (90 ft.)

Temperature 5° C to 140° C

FEATURES

Low head, high capacity pumps

Gland packed/mechanical seal

50HZ/60HZ availability

Option available in horizontal as well as vertical delivery position

Primary Usage

Chemical & pharma

Coal

Sugar Factory

Food & Beverages

Irrigation

Marine & Defence

Textile

Tyre

Water Resource

IOM MF Catalogue

Heading gif -1

Solid Handling Pump - NK

Effluents, sewage, muddy, viscous, contaminated liquids containing solids in suspension, in sugar factories, sewage pumping stations as well as chemical, fertiliser, pulp and paper, food and steel industries

SPECIFICATIONS

Delivery size up to 450 mm

Capacity up to 3400 m3/hr

Head up to 55 metres

Temperature from (-) 10° C to 140° C

FEATURES

Single stage, end suction, horizontal, non-clog pumps

Available in vertical execution

Primary Usage

Sugar Factory

Heading gif -1

Solid Handling Pump - SHM

Kirloskar SHM solid handling pumps are single stage, single suction pumps with a back pull out type design. These are horizontal non-clog pumps while SHS are vertical non-clog pumps used for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These solid handling pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. SHM solid handling pumps have standard grease lubrication, although oil lubrication is also available as an option. In case of SHS pumps, the lubrication is grease based. The complete range of SHM solid handling pumps is covered by four driving units, thereby reducing inventory and achieving interchangeability of parts.

APPLICATIONS

Sludge and paper pulp

Sewage and waste water

Viscous liquids and fibrous materials

Contaminated process liquids

Bagasse

Strained and unstrained juice

Power material slurries

Sugar factory waste

SPECIFICATIONS

Delivery size up to 200 mm

Capacity up to 800 m3/hr

Head up to 90 metres

Working pressure up to 16 bar

Temperature from (-) 10° C to 140° C

FEATURES

Solid size up to 105 mm

Gland packed/mechanical Seal

50 Hz/60 Hz availability

Available in vertical execution

Primary Usage

Building & Construction

Coal

Sugar Factory

Chemical & pharma

Irrigation

Power Plant

Marine & Defence

Textile

End Suction Solid handling Pump SHM Catalogue

IOM SHM Catalogue

Heading gif -1

Solid Handling Pump - SHL

Kirloskar SHL solid handling pumps are single stage, single suction pumps with a back pull out type design. These are horizontal non-clog pumps. The SHL pump section is suspended by a column pipe which also protects the transmission shaft. The impeller is a single suction type non-clog, free flow dynamically balanced, capable of handling liquids containing solids.

APPLICATIONS

Contaminated process liquids like sugar factory waste, trade liquors

For handling liquids with solids in suspension, pulpy material in paper industries

Viscous liquids or powdered material slurries

SPECIFICATIONS

Delivery size ranging from 250 mm to 900 mm

Capacity up to 13000 m3/hr

Head up to 82 metres

Temperature from (-) 10° C to 90° C

FEATURES

Horizontal shaft, single stage, singe suction pumps with back pull-out type design

50 Hz/60 Hz availability

Primary Usage

Sugar Factory

Marine & Defence

Power Plant

End Suction Solid handling Pump SHM Catalogue

IOM SHM Catalogue

Call Us Now

Subscribe Form

Email(Required)

hCaptcha(Required)

Δ

Contact Info

Head Office:
44, Kakathope Street,
Madurai – 625 001.

+91 93638 44800

Branch Office:
13 Annathoppu Street,
Madurai – 625 001.

+91 95666 73535

0452 - 4378800

88700 10633

info@saiengg.in

Quick Links

Home

About Us

Our Products

Brands

Blog

Certificate

Contact Us

Locate Us

Our Products

Motors

Switch Gears

Pumps

Engines

Genuine Spares

Firefighting Engines & Pumps

Lubrication Oil

Location

Design by Cbra India